|
Price: (USD)
$4.68
$4.21 |
25-99 |
10.00% off. | $3.98 |
100- |
15.00% off. |
In stock.
|
Shipping from:
$4.00
|
|
|
These RGB LEDs can be individually controlled via a 2 wire interface (clock and data). Each LED accepts 5 bits for Red, Green, Blue for a total of 32,768 bright colors in a 16 bit payload. The data can be clocked in at up to 25 mHz, so you can drive thousands them at a very high frame rate. Even an Arduino can run thousands with ease using just two data lines. Each LED is daisychained off the previous LED. Wires between LEDs can be extended up to several meters, but you may need to drop the data rates slightly.
The interconnecting wires are 200mm long. They are completely waterproof for outdoor use if desired and have a plastic backing plate with screw holes.
See example Arduino sketch in the related project at the bottom of this page.
Applications are unlimited: Signage, PC Case Illumination, Bar/Club lighting, Festive Lighting, Garden Lighting.
We now carry wire for connecting these modules here.
Specifications |
White diffuser dimensions | 50mm Length x 50mm Width x 42mm High. Backing plate is 69mmx69mm and 13mm High |
Voltage | 12.0VDC |
Max Watts | 0.7W (60mA) |
Life | 50,000 hours |
Luminance | 18 Lumens |
Here is an Arduino library to operate the LEDs including an example Sketch
|
|
LED Pixel 20mm x bundle of 20
LED Pixel 20mm diameter. DC5V @ 60mA peak. Pre-wired. Weatherproof. 15 bit color. String of 20.
|
$45.76
US Dollars
On backorder.
|
|
|
|
|
LED Pixel 17mm x 79mm
LED Pixel 17mm x 79mm DC12V @ 50mA peak. Pre-wired. Weatherproof. 15 bit color. Our longest LED pixel.
|
$3.12
US Dollars
In stock now.
Add to Cart
|
|
|
|
|
|
|
|
|
|
|
|
|
About us
|
|