|
Price: (USD)
$2.90
$2.61 |
25-99 |
10% off. | $2.47 |
100- |
15% off. |
In stock.
|
Shipping from:
$1.89
|
|
|
These pre-wired RGB LEDs can be individually controlled via a 2 wire interface (clock and data). Each LED accepts 5 bits for Red, Green, Blue for a total of 32,768 bright colors in a 16 bit payload. The data can be clocked in at up to 25 mHz, so you can drive thousands them at a very high frame rate. Video screen anyone? Even an Arduino can run thousands with ease using just two data lines. Each LED is daisy-chained off the previous LED. The interconnecting wires are 50mm long. They are completely waterproof for outdoor use if desired. Each module contains one SMD RGB LED and a controller chip.
See example Arduino sketch in the related project at the bottom of this page.
To implement, they require a 20mm hole. Ideally sheeting material used should be < 2mm. Modules can be daisy-chained indefinitely, however power should be applied to chains longer than 40 and then again for every chain of 40 LEDs. This ensures consistent brightness along the chain.
Applications would include: LED Video Screen array, PC case illumination, bar/club lighting, festive lighting, garden lighting, displays, installations, signage, car customization.
Specifications |
Module diameter | 19.6mm - designed for 20mm hole |
Connecting wire | 50mm |
Voltage | 5.0V |
Max Watts | 0.3W (60mA) |
Beam Angle | 160 degrees - Wide angle |
Luminance | 9 lm |
|
|
LED Pixel 8mm
LED Pixel 8mm diameter. DC5V @ 60mA peak. 15 bit color. Our smallest LED pixel.
|
$2.03
US Dollars
In stock now.
Add to Cart
|
|
|
|
LED Pixel 17mm x 79mm
LED Pixel 17mm x 79mm DC12V @ 50mA peak. Pre-wired. Weatherproof. 15 bit color. Our longest LED pixel.
|
$2.90
US Dollars
In stock now.
Add to Cart
|
|
|
|
|
|
|
|
RGB LED Array
|
More advanced example of LED modules arranged in an array.
|
|
|
|
|
|
|
|
|
|
About us
|
|